• Nov 22,2019

1. Setting Printer Mode of RP820 WIFI Bluetooth Thermal Receipt Printer 820 printer is initially setup with default value. However, the default printer mode can be reconfigured to satisfy customer’s needs through the DIP switch, which is located at the bottom of the printer. The function of DIP switch setting as follows： 2. Self-checking of RP820 WIFI Bluetooth Thermal Receipt Print...

• Nov 22,2019

Printer Maintenance of WIFI Bluetooth Thermal Receipt Printer RP820 1. Print Head Maintenance When the printer has following circumstances, the user should clean the print head: (1) Printing is not clear; (2) Some longitudinal columns on the printing page is vague; (3) Loud noise when feeding. Procedure of maintaining the print head is listed below: (1) Turn off the power supply and open the top c...

• Dec 15,2019

Fix the Paper Jam and Fault treatment Intruction of Thermal Receipt Printer Bluetooth RP820 I. Fix the Paper Jam of Thermal Receipt Printer Bluetooth RP820 When paper jam happens, turn off the power supply and open the top cover, wait for the cooling of print head then remove the jammed paper. After that, reload the paper roll and close the top cover. Use the recommendator...

• Dec 15,2019

Product Introduction of RP850 Bluetooth Thermal Receipt Printer with Auto Cutter 850 series printer is a POS direct thermal receipt printer with easy operation and high cost effective, which is widely used in supermarket, hospital, restaurant, bank, oil station, turnpike etc. Safety Notice: Please read carefully and strict compliance with use of following instructions before operating the printer....

• Dec 20,2019

Power Switch, Keystroke and Indicator Light Instruction of 80mm Bluetooth Printer for Android 1. Power Switch Switch is for turning on/off the power supply of printer which is located on the left. When pressing “-”, the printer turns on and when pressing “O”, it turns off. Notice: Do not turn on the switch unless the user connects the power supply. 2. Keystroke and Indicator Light Keystroke and in...

• Dec 20,2019

Self-checking of 80mm Thermal Receipt Printer Bluetooth RP850 Self-checking can test whether the receipt printer is working well or not, if it can print The test list correctly, that means the printer is good enough (which is excluding theproblem with the connected interface to PC); otherwise, it needs repair. Self-checking could print software version number, print density, interface type, Englis...