• Jul 23,2019

1. Self-checking of 58mm Receipt Printer Self-checking can test the printer is work well or not, if it can print the test  list correctly that means the printer is good enough (which is excluding the problem with the connected interface to PC); otherwise, it needs repair. Self-checking could print software version number, print density, interface type, English character and some Chinese chara...

• Jul 23,2019

1、58mm Thermal Receipt Print head maintenance When the printer has following circumstances should clean the print head: (1) Printing is not clear; (2) Some longitudinal columns on the printing page is vague; (3) Loud noise when feeding. Procedure of maintaining the print head is listed  below: (1) Turn off the power supply and open the top cover. Remove the  paper if necessary. (2) Pleas...

• Jul 30,2019

76mm impact printer is POS impact dot matrix receipt printer with stable  performance, high reliability and simple operation. It is widely used in supermarkets, shopping  malls, hospitals, restaurants, banks, gas stations, toll collection  and other places for its highcost effective. Please read the content of the following carefully before using  the printer, and strictly foll...

• Jul 30,2019

1、Main features of 76mm impact receipt printer ● Low noise, bidirectional and high speed printing ● Support cash drawer driver, support double color printing (black and red) ● Compact and attractive appearance ● Reasonable structure, easy operation and maintenance ● Interface optional : USB, parallel, serial，Ethernet ● Paper source sensor, automatic paper loading, and  automatic detection of ...

• Aug 06,2019

The interface Introduction of 76mm thermal receipt printer I. Printer Serial Port 76 printer's serial port is RS-232 standard, and communication baud  rate can be 4800bps, 9600bps, 19200bps or 38400bps optional (can  be adjusted via DIP switches). It is 8 bits of data, no parity, 1 stop  bit, support RTS / CTS and XON / XOFF handshake protocol. The printer serial port pin funct...

• Aug 06,2019

Black Mark Position Control Instruction of 76mm Thermal Printer 1、Printing mechanism and printing control relevant parameters (1) From the print head of printing mechanism to the printer  head tear paper line position is 22 mm. (2) From the print head of printing mechanism to the  black mark detection switch is 28 mm. 2、Black mark printing note (1) Black Label must be printed on the...