• Feb 17,2022

Rongta 80mm Thermal Receipt Printer Operation Manual for Changing Parameters via Browser 1. Overview Welcome to use 80 Series Thermal Printer. You can update the Ethernet port parameters with the Windows application software provided by us or a browser (such as IE/Firefox).  2. Obtain the printer IP address Connect the printer to the power adapter. Press Feed button and then turn on the print...

• Feb 14,2022

Voice Function setting of Thermal Receipt Printer 3inch The function only supports some models. 1. Select the Printer Properties, and click “Device Settings” 2. Click the Voice Function, select the ringtone to be set, and click "Apply". 3. Click "General" and select “Print Test Page”, and there will be voice when printing.

• Feb 14,2022

Diffusion knife and Cashbox Setting of 80mm Thermal Receipt Printer 1. Select the Printer Properties, and click “Print Preference Pages” 2. The driver has been set to automatically cut paper and open the Cashbox by default. If you need to change the settings, please follow the instructions below: Select “Paper/Quality”, choose whether to cut paper in the “Paper Source” option, for example Rep...

• Feb 14,2022

Parallel Port Setting and Test Page Printing of 80mm Thermal Printer Receipt 1. Set 80mm Thermal Printer Properties After installing the printer driver, view “Start”-> “Control Panel”-“Printer and Fax”-> “Printer Properties” of 80mm Series Printer. The "Printer Properties" window will pop up, as shown in the figure below: 2. Print Test Page via Parallel Port Select a port among “LPT1: P...

• Feb 11,2022

Network Port Setting and Test Page Printing of 80mm Receipt Printer 1. Set Receipt Printer Properties After installing the printer driver, view “Start”-> “Control Panel”-“Printer and Fax”-> “Printer Properties” of 80mm Series Printer. The "Printer Properties" window will pop up, as shown in the figure below: 2. Print Test Page via Network Port Open the Printer Properties Select “Add Por...

• Feb 11,2022

USB Port Setting and Test Page Printing of Thermal Receipt Printer 80mm 1. Set Thermal Printer Properties After installing the printer driver, view “Start”-> “Control Panel”-“Printer and Fax”-> “Printer Properties” of 80mm Series Printer. The "Printer Properties" window will pop up, as shown in the figure below:  2. Print Test Page via USB Port Select “USB001 USB Virtual Printer Po...

• Feb 10,2022

Serial Port Setting and Test Page Printing of 80mm Thermal Printer (Model: RP325/RP326/RP327/RP328) 1. Set Printer Properties After installing the printer driver, view “Start”-> “Control Panel”-“Printer and Fax”-> “Printer Properties” of 80mm Series Printer. The "Printer Properties" window will pop up, as shown in the figure below: 2. Print Test Page via Serial Port Select “Port” a...

• Feb 10,2022

80mm Thermal Receipt Printer Windows Driver installation 1. Run "DriverInstall" to install the printer driver. The dialog box shown in the figure below pops up: Select the installation language and click “OK”, as shown in the figure above. 2. The dialog box shown in the figure below pops up; click “Install”, as shown in the figure above. 3. Then the dialog box shown in the figure be...

• Dec 26,2019

Print Roll Maintenance of Bluetooth Thermal Receipt Printer 80mm When the receipt pos printer has following circumstance, the user should clean the print roll: (1) Printing is not clear; (2) Some longitudinal columns on the printing page is vague; (3) Loud noise when feeding. Procedure of maintaining the print roll is listed below: (1) Turn off the power supply and open the top cover. (2) Use the ...

• Dec 26,2019

Sensor Maintenance of RP850 Wifi Thermal Printer 80mm When the printer has following circumstance, the user should clean the paperless sensor: (1) During the printing, the printer occasionally stops print and the paperless alarm is beeping. (2) No paperless alarm. Procedure of maintaining the sensor is listed below： (1) Turn off the power supply and open the top cover. Remove the paper if necessar...